Sim Board Assy &Rf Shielding Cover &Sim Conductive Adhesive - Sony C2305 Working Instructions

Replacement
4.21 SIM Board Assy &RF Shielding Cover &SIM
conductive adhesive
Follow the 3.1 – 3.2 Disassembly instructions!
Carry out the Removal as described below.
Prepare the new SIM Board Assy RF Shielding Cover with
Adhesive.
Carry out the Installation as described below.
Follow the 5.3 – 5.4 Reassembly instructions!
REMOVAL
Remove the SIM Board Assy from Main PBA.
BtB connector is located at shown position in Picture.
If the SIM Board Assy is damaged or deformed after
disassembly, then Scrap it, Not to be reused anymore!
Remove the RF Shielding & SIM conductive adhesive from
Main PBA.
Scrap, Not to be reused!
INSTALLATION
Place a new RF Shielding Cover on Main PBA.
1275-8436 Rev2
©
Sony Mobile Communications AB – Company Internal
Working Instruction Repair Instruction Mechanical/
36(50)