Page 1
DAAC24D-OF / DAAC50D-OF Air compressors USER'S MANUAL www.daewoopowerproducts.com Manufactured under license of Daewoo International Corporation, Korea...
1. OPERATING INSTRUCTIONS Please read and save these instructions. Rear carefully before attempting to assemble, install, operate or maintain the product described. Protect yourself and others by observing all safety informations. Failure go comply with instructions could result in personal and/or property damage! Retain instructions for future reference.
2. GENERAL SAFETY INFORMATION Since the air compressor and other components (material pump, spray guns, filters, lubricators, hoses,etc.) used, make up a high pressure pumping system, the following safety precautions must be observed at all times: 1. Read all manuals included with this product carefully. Be thoroughly familiar with the controls and the proper use of the equipment.
DANGER! Never attempt to repair or modify a tank! Welding, drilling or any other modification will weaken the tank resulting in damage from rupture or explosion . Always replace worn or dama- ged tanks. WARNING! Drain liquid from tank daily. 13.
4. MAIN TECHNICAL DATE Model: DAAC50D-OF Model: DAAC24D-OF Voltage/Frequency: 220 - 240 V / 50 Hz Voltage/Frequency: 220 - 240 V / 50 Hz Power: 0.7 hp / 550 W Power: 0.7 hp / 550 W Capacity: 50 L Capacity: 24 L Cylinder: 2*63.7 mm...
Page 7
CAUTION! Improper use of grounding plug can result in a possible in a possible risk of electrical shock! DANGER! Do not use a grounding adapter with this product! 2. If repair or replacement of cord or plug is necessary, do not connect grounding wire to either flat blade terminal.
Page 8
LUBRICATION This is an oilless product and does not require lubrication to operate. BREAK-IN PROCEDUR CAUTION! Do not attach air chuck or other tool to open and of hose until start-up has been completed and unit checks ok. IMPROTANT: Do not operate compressor before reading instructions or damage may result. 1.
REGULATOR KNOB (figure 4) 1. This knob controls air pressure to an air-operated tool or paint spray gun. 2. Turn clockwise to increase air pressure at outlet. When desired pressure is reached, locked with nuts. 3. To lower air pressure at outlet, turning counterclockwise. Figure 4 4.
THERMAL OVERLOAD PROTECTOR CAUTION! This compressor is equipped with an automatic reset thermal overload protector, which will shut off motor if it becomes overheated. If thermal overload protector shuts motor OFF frequently, look for the following causes. 1. Low voltage. 2.
Page 11
1. Loose bolts, tank not level 1. Tighten bolts, shim tank to level 2. Defective bearing on eccentric or position Knocks, rattles motor shaft 2. Replace 3. Cylinder or piston ring is worn or 3. Replace or repair as necessary excessive vibration scored 1.
9. PARTS ILLUSTRATION LIST Name Name Capacitor protector Fan cover Capacitor Bolt Terminal cap Locking ring Handle grip Lenft fan Magnetic valve Bolt Check valve Crank High pressure soft tube Bearing Quick connect Regulator valve Shock relief foot pad Connector Left crankcase Pressure switch Bearing...
Need help?
Do you have a question about the DAAC24D-OF and is the answer not in the manual?
Questions and answers