Table of Contents
Advertisement
②
6.7
CUTTING PREPARATION
Before you start to cut, make sure that
•
Wear heavy gloves for maximum grip and protection.
•
Maintain a proper grip on the machine during operation.
•
Use your right hand grip on the rear handle while
your left hand grip on the pole shaft.
•
Keep your body to the left of the chain line.
•
Never use a left-handed (cross-handed) grip, or any
stance that places your body or arm across the chain
line.
•
Never stand directly under the limb you are cutting.
•
Periodically examine the tightness of the collars during
operation.
7
OPERATION
Remove the battery pack and keep hands clear of the lock
out button when you move the machine.
IMPORTANT
Examine the chain tension before each use.
①
NOTE
English
7.1
DELIMBING A TREE
B
A
Make sure that there is nothing or nobody in the area where
the branches fall.
•
Stand opposite the branch you will cut.
•
Start to cut the higher branches.
•
Then cut the lower branches.
•
Cut downwards to prevent the bar from jamming.
7.2
LIMB TREE BRANCHES
Limbing is to remove the branches from a fallen tree.
1. Keep the larger lower branches to hold the log off the
ground.
2. Remove the small limbs in one cut.
3. Limb the branches with tension from the bottom to up.
4. Keep the larger lower branches as a support until the log
is limbed.
8
MAINTENANCE
Do not let brake fluids, gasoline, petroleum-based materials
touch the plastic parts. Chemicals can cause damage to the
plastic, and make the plastic unserviceable.
7
WARNING
A
A
CAUTION
EN
Advertisement
Table of Contents
