Table of Contents
Advertisement
!9 / @0 Light Measurement Area Selection Switch
The back light sensing zone can be set in the BRIGHT-
NESS AUTO mode.
00: OFF (All of the screen)
01: Preset 1 (Pattern 1 Sensing Zone)
10: Preset 2 (Pattern 2 Sensing Zone)
Sensing
Zone
Preset 1
11: Automatic Sensing Zone (The sensing zone is auto-
matically set according to the object.)
@1 Aperture Level Selection Switch
The aperture level can be selected by this switch. High
level can be obtained by turning on this switch. Low level
can be obtained by turning off this switch.
@2 Cable Selection Switch
This switch is provided for the camera cable GP-CA162/2
and GP-CA162/38. When using the camera cable GP-
CA162/38, turn on this switch.
Camera Head GP-KS822H
@3 Focus Lock Ring
This ring is used to secure the Focus Ring.
on
off
Preset 2
on
off
on
off
-9-
Advertisement
Table of Contents
