Congratulations on your purchase of the EHX Lizard Queen Octave
Fuzz pedal. The Lizard Queen was originally designed by Josh Scott
and Daniel Danger as a tribute to the sound and look of iconic
Electro-Harmonix pedals from the 70s and 80s. Now, in partnership
with JHS Pedals, Electro-Harmonix brings you the Lizard Queen's
biting, octave-tinged fuzz in a compact, road-worthy enclosure.
Connect your guitar to the INPUT jack on the Lizard Queen and the
AMP jack to your amp's input. Power your Lizard Queen by 9V battery
or external power supply. Press the footswitch to ensure the STATUS
LED is lit. Your Lizard Queen is now ready to go.
The Lizard Queen is a fixed-gain fuzz which means you can adjust the
intensity of the fuzz using your guitar's volume knob.
Voltage: 9VDC
This device may be powered with an Electro-Harmonix 9.6DC-200, MOP-D10, or S8 power supply. Use of the
wrong adapter or a plug with the wrong polarity may damage the device and void the warranty. Do not exceed
12VDC on the power plug. Power supplies rated for less than 10mA can cause the device to act unreliably.
Operating Instructions
POWER SUPPY REQUIREMENTS:
Current: 5mA
Polarity: Center-Negative
Battery: 9V
Need help?
Do you have a question about the Lizard Queen and is the answer not in the manual?
Questions and answers