5-2) Saved Data Files - Figaro EM7162 Instruction Manual

- The screen displays data from the most recent 10 minutes of measurement data for a
measurement session (see Figure 9).
- Measurement data is saved in CSV format on the computer at recording interval specified in
Step 6 above.
(To change the destination folder to save or saved file name, see Sec. 5-2.)
(12) Completion of measurement
Click the [Stop] button to terminate measurement.
When measurement is completed, measurement data is saved in the CSV format.
* Before attaching or removing the sensor module (CDM7160), be sure to turn off the
power switch (SW1).

5-2) Saved data files

(1) Measurement data is saved in a CSV file in the folder selected as the destination to save.
Default setting of the destination folder is c:>Users>user name>Documents.
The default Document folder can be browsed as follows:
- Windows 10:
Right-click the Start button ⇒ Explorer ⇒ Select Document in the folder area
(2) The storage destination can be changed in the following way when CO
being measured:
Figure 9 - Measurement Data Display Example
9
concentration is not
2