4-4) Uninstalling The Measurement Data Management Software - Figaro EM7162 Instruction Manual

4-3) Installiing Framework 3.5 SP1
If .NET Framework 3.5 SP1 software is not installed on your computer, download it from the
following Microsoft website:
(Japanese version)
https://www.microsoft.com/ja-jp/download/details.aspx?id=22
(English version)
http://www.microsoft.com/en-us/download/details.aspx?id=22

4-4) Uninstalling the measurement data management software

Delete the folder that contains the following two files from the computer:
- ConcMeasure.exe
- ConcMeasure.exe.config
5. Using EM7162 with the Measurement Data Management Software
After installing the measurement data management software and USB driver (FT232R-USB) on the
computer, connect EM7162 to the computer using a mini B-USB cable. In this way, CO
and measurement data can easily be collected by the CDM7162 CO
5-1) Initial setting of the measurement data management software and measurement data collection
(1) Mount the CDM7162 sensor module onto the EM7162 (see Sec.3-3)
(2) Connect the EM7162 to the computer with a mini B-USB cable.
The EM7162 is powered through the USB cable.
(3) Turn on the power switch (SW1) on EM7162 (see Fig. 7).
(4) Double-click the icon for the data management software
(ConcMeasure.exe) as installed on the computer to display
the startup screen shown in Figure 8.
ConcMeasure.exe
sensor module.
2
7
concentration
2
SW1
(power
switch)
↑ON
↓OFF
Figure 7