4-2) Installing The Measurement Data Management Software - Figaro EM7162 Instruction Manual

(7) Right-click the "FT232R USB UART" USB driver icon and select "Properties" (Figure 5).
Figure 5 - USB Driver Icon on the "View devices and printers" screen
(8) Click the "Hardware" tab on the "Properties" screen and check the displayed COM port
number (Figure 6). Write down this number as this is necessary for initial setup of the data
management software. (See Sec. (5-1) (5) ).

4-2) Installing the measurement data management software

Copy the folder named "Conc Measure" from the USB flash drive and paste it to the desired
location on the computer (e.g. desktop).
Open the "Conc Measure" folder on the computer and confirm that "ConcMeasure.exe" and
ConcMeasure.exe.config file are present.
Measurement data management software executable file icon:
Figure 6 - COM Port No.
6
ConcMeasure.exe