AES SOLAR Subscriber
Wiring
Refer to the
section for supply and connection requirements.
The Suppress Battery Fault and Suppress Charger Fault are grayed out in the interface and
Note:
cannot be changed when using this setting.
•
Suppress DC Power Fault: Set Suppress DC Power Fault to Yes/No by clicking the Suppress DC Power Fault
switch.
When done with changes, click Save Changes.
•
Power From: 12 V DC only
Wiring
Refer to the
section for supply and connection requirements.
The Suppress Battery Fault and Suppress Charger Fault are grayed out in the interface and
Note:
cannot be changed when using this setting.
Suppress DC Power Fault
switch.
When done with changes, click the Save Changes button.
:
Set Suppress DC Power Fault to Yes
No by clicking the Suppress DC Power Fault
/
AES P/N 40-3100S Rev. 3, 3/14/2023
27