Table of Contents
Advertisement
T-V LIN K
T-V Link
Functions
When you connect the recorder and your TV via a fully-wired
21-pin SCART cable (
available. You can use these functions only with a TV offering
T-V Link, etc.*
For details, refer to the instruction manual for your TV.
* Compatible with TVs offering T-V Link, EasyLink, Megalogic,
SMARTLINK, Q-Link, DATA LOGIC or NEXTVIEWLINK via fully-
wired 21-pin SCART cable. The degree of compatibility and
available functions may differ by system.
N ex TV iew Link
You can download the EPG (Electronic Programme Guide)
information from your TV for timer-programming on the
recorder.
For details, refer to the instruction manual for your TV.
TV Auto Pow er O n
You can turn on the TV and set it to video mode automatically
whenever you play a tape.
For details, refer to the instruction manual for your TV.
VCR Auto Sta ndby
You can use your TV's remote control to turn off the recorder.
For details, refer to the instruction manual for your TV.
Downloaded from:
https://www.usersmanualguide.com/
pg. 6), the following functions are
Direct Rec
You can start recording the programme that you are watching
on your TV with simple operation. Press and hold RECO RD and
press PLAY on the remote control, or press RECO RD on the
recorder.
Follow the procedure below to use this function.
TURN O N THE RECO RDER
1
Press
.
ACCESS MAIN MEN U
SCREEN
2
Press M EN U .
ACCESS MO DE SET
SCREEN
3
Press %fi to move the
highlight bar (pointer) to
"MODE SET", then press
O K or
.
#
SELECT DIRECT REC MO DE
4
Press %fi to move the
highlight bar (pointer) to
"DIRECT REC", then press
O K or
to set to "ON".
#
RETURN TO N O RMAL
SCREEN
5
Press M EN U .
N O TES:
● If "DIRECT REC" is set to "OFF", the
as described in "Recording" (
● During the Direct Rec, "– –" appears on the display panel.
● When you perform T-V LINK functions, be sure to use a fully-
wired 21-pin SCART cable.
● Retake function does not work during Direct Rec (
● Direct Rec is not possible with a scrambled broadcast.
● To record a scrambled broadcast, set "DIRECT REC" to "OFF"
and follow the procedure described in "Recording" on page
14.
11
MAIN MENU
MODE SET
AUTO CH SET
MANUAL CH SET
INITIAL SET
REC LEVEL CTL
R. A.
EDITT
[5 ∞ ] =
[MENU] : EXIT
MODE SET
B. E. S. T.
ON
PICTURE CONTROL
AUTO
AUTO TIMER
OFF
O. S. D.
ON
DIRECT REC
ON
AUTO SP=LP TIMER
OFF
DIGITAL 3R
ON
NEXT PAGE
[5∞] =
[MENU] : EXIT
RECO RD button functions
pg. 14) .
pg. 50).
Advertisement
Table of Contents
