Before Installing The Appliance; Installation; Ambient Temperature; Before Placing Food In The Appliance - Proline PLC253NFWH Instruction Manual

BEFORE INSTALLING THE APPLIANCE

Before connecting your appliance to the power supply, check that the voltage stated on the rating label of your appliance corresponds to the voltage in
your home. A di erent voltage could damage the appliance.
The plug is the only way to unplug the appliance and should therefore be accessible at all times. To turn o main power to the appliance, turn it o and
then detach the plug from the outlet.
The appliance must be grounded. The manufacturer is not responsible for damages that may occur as a result of usage without grounding.

INSTALLATION

Install the appliance in a dry, well ventilated room. The installation location should neither be exposed to direct sunlight nor near a heat source, e.g. a
cooker, radiator, etc.
To ensure adequate ventilation for the appliance, allow a minimum of 10 cm of airspace on each side of the cabinet.
For uneven surfaces, front feet can be aligned.

AMBIENT TEMPERATURE

This appliance is designed to operate in ambient temperature between 16°C and 38°C. If these temperatures are exceeded, i.e. colder or warmer,
the appliance will not operate correctly. If the ambient temperatures are exceeded for long periods, the temperature in the freezer compartment will
rise above -18°C and food spoilage may occur.

BEFORE PLACING FOOD IN THE APPLIANCE

Remove all packaging.
Allow the appliance to run empty for 2 – 3 hours so the compartments can cool to the appropriate temperature.
Clean the inside of the appliance with warm water and a little liquid detergent to remove manufacturing and transportation dust.

POWER FAILURE

If there is a power failure, do not open the drawers of the appliance. Frozen food should not be a ected if the power failure lasts for less than 7 hours.
Do not refreeze frozen foods that have thawed completely. The food may be dangerous to eat.

ADJUSTING THE TEMPERATURES

Temperature control for the fridge compartment
To set the temperature inside the fridge compartment
Repeatedly press until the desired temperature indicator light illuminates.
There are 5 temperature settings for choice: 2°C, 3°C, 4°C, 6°C and 8°C.
Fast cool function
You can use the fast cool function to increase the cooling capacity of the fridge compartment when placing larger amounts o ood within it.
To activate this function, repeatedly press
This function will be automatically deactivated after about 2.5 hours and the fridge compartment will return to the previous selected temperature
setting.
until the FAST COOL indicator light illuminates.
EN-5