Husqvarna 443RB Operator's Manual page 17

5. Pull the starter rope handle slowly with your right
hand until you feel resistance.
WARNING: Do not wind the starter rope
around your hand.
CAUTION: Do not pull the starter rope to
full extension and do not let go of the
starter rope handle. This can cause
damage to the product.
6. Pull the starter rope handle quickly and with force
until the engine starts.
7. Set the choke control to the operation position.
WARNING: Keep body parts away from
the spark plug cap. Risk of burn injuries.
Do not use the product with a damaged
spark plug cap. Risk of electrical shock.
To start a warm engine
1. Move the stop switch to the start position.
2. Push the air purge bulb until fuel starts to fill the air
purge bulb.
3. Set the choke control to the operation position, then
pull the starter rope handle until the engine starts.
1395 - 002 - 14.01.2020
To start with a throttle handle with a start
throttle lock
1. Push the throttle lockout and the throttle trigger to
set the throttle to the start position. Then push the
start throttle button (A).
2. Release the throttle lockout and the throttle trigger,
followed by the start throttle button. The throttle
function is now activated.
3. To return the engine to idle speed, push the throttle
lockout and throttle trigger again.
To stop the engine
1. Push the throttle trigger to the idle position.
2. Move the stop switch to the stop position.
To operate the grass trimmer
CAUTION: Make sure that you slow the
engine to idle speed after each operation. A
long period at full throttle without a load on
the engine can cause damage to the engine.
Note: Clean the cover of the trimmer head when you
attach a new trimmer line to prevent vibrations. Examine
other parts of the trimmer head and clean if it is
necessary.
A
17