Options Setting - Electrolux EWF1023BDWA User Manual

18 www.electrolux.com
-
Do not use gelatinous or thick
liquid detergents.
-
Do not put more liquid than the
maximum level.
-
Do not set the "Prewash" phase.
-
Do not set the "Delay End".
Measure out the detergent and the
2.
fabric softener;
- Pull out the dispenser drawer until
it stops.
- Measure out the amount of
detergent required, pour it into the
main wash compartment
If you wish to carry out the
-
"Prewash" phase, pour it into the
compartment marked
- If required, pour fabric softener into
the compartment marked
NOTE: When you use the
liquid detergent
The softener amount used must
not exceed the "MAX" mark in the
drawer.
If you use thick softeners it is
recommended to dilute with water.
-
Close the drawer gently.
Residues of detergent, softener
and water may remain in the
dispenser. It is recommended to
clean the dispenser regularly to
remove any residue.
.

5.3 Options Setting

1. If you want your laundry to be spun or
use temperature different from the one
proposed by the washing machine,
pess "Spin" and "Temp" touchpads
repeatedly to change the spin speed
and temperature.
Press the option touchpads, if you
want your laundry to be washed with
special functions.
.
-
Different functions can be
combined which is dependent on
the program selected.
-
If an option is not compatible with
the wash program selected, the
symbol "
along with buzzer sound.
2. If you want to adjust washing time,
press the "Time Manager" touchpad
.
repeatedly to increase or decrease
washing time. (See Time Manager
guide on page 14)
If you want to define the end of the
washing program, press the "Delay
End" touchpad repeatedly to choose
your washing machine working time.
NOTE
NOTE
NOTE
" will flash on display