Table of Contents
Advertisement
Available languages
Available languages
WARNING
!
EXCESSIVE WEIGHT HAZARD
Use two or more people to move product.
Failure to do so can result in back or other injury.
Remove Interior Packaging
Your wine cellar has been packed for shipment with all
parts that could be damaged by movement securely fas-
tened. Remove internal packing materials and any tape
holding internal components in place. The owners manual
is shipped inside the product in a plastic bag along with the
warranty registration card, and other accessory items.
Important
Keep your carton and packaging until your wine cellar has
been thoroughly inspected and found to be in good condi-
tion. If there is damage, the packaging will be needed as
proof of damage in transit. Afterwards please dispose of all
items responsibly in particular the plastic bags which can
be a suffocation hazard.
Note to Customer
This merchandise was carefully packed and thoroughly
inspected before leaving our plant. Responsibility for its
safe delivery was assumed by the retailer upon acceptance
of the shipment. Claims for loss or damage sustained in
transit must be made to the retailer.
DO NOT RETURN DAMAGED MERCHANDISE TO THE
MANUFACTURER - FILE THE CLAIM WITH THE RE-
TAILER.
CAUTION
!
If the power module was shipped or has been laying on
its side for any period of time allow the power module to
sit upright for a period of at least 24 hours before plugging
in. This will assure oil returns to the compressor. Plugging
the power module in immediately may cause damage to
internal parts.
UNPACKING YOUR WINE CELLAR
3
WARNING
!
Help Prevent Tragedies
Child entrapment and suffocation are not problems of
the past. Junked or abandoned refrigerators are still
dangerous even if they sit out for "just a few days".
If you are getting rid of your old freezer, please follow
the instructions below to help prevent accidents.
Before you throw away your old refrigerator:
• Take off the doors or remove the drawers
• Leave the shelves in place so children may not easily
climb inside.
Tools to have available for installation:
•
Phillips screwdriver
•
Flat blade screwdriver
•
Hex head nut drivers size
•
Level
•
Drill and drill bit (#6 - .204)
•
Open end wrenchs size
•
Slip joint pliers
•
Adjustable wrench
•
Tape measure
•
Hex socket and ratchet size
•
3/32" Hex key (Allen wrench)
⁄
" and
⁄
"
1
5
4
16
⁄
",
⁄
" and
⁄
"
1
7
1
4
16
2
⁄
"
7
16
Advertisement
Chapters
Table of Contents
