Panasonic PT-D5700 Specifications page 7

S F
P E C I L
DLP ™ Projectors
Calculation of the projection distance
For a screen size different from the above, use the equation below to calculate the projection distance.
Aspect ratio 4:3
ET-DLE100 minimum
maximum
Supplied lens minimum
maximum
ET-DLE200 minimum
maximum
ET-DLE300 minimum
maximum
ET-DLE400 minimum
maximum
ET-DLE050 (fixed focus)
• Distances calculated with the above equations will include a slight error.
• When an SXGA signal is input, the left and right edges of the image are blanked, and the image is projected at a screen aspect ratio of 5:4.
• The brightness varies depending on the zoom setting.
Shift range
Optical axis shift function allows to shift the
position of a projected image as shown.
Installable angle
Install the projector at an angle within the range shown below.
• Vertical direction
The projector may be installed at a vertical
angle of 360°.
As of May 2007
E
L (m) = (diagonal screen size in inches) x 0.0276 - 0.0452
L (m) = (diagonal screen size in inches) x 0.0372 - 0.0478
L (m) = (diagonal screen size in inches) x 0.0370 - 0.0650
L (m) = (diagonal screen size in inches) x 0.0488 - 0.0638
L (m) = (diagonal screen size in inches) x 0.0504 - 0.0657
L (m) = (diagonal screen size in inches) x 0.0824 - 0.0758
L (m) = (diagonal screen size in inches) x 0.0795 - 0.1380
L (m) = (diagonal screen size in inches) x 0.1232 - 0.1310
L (m) = (diagonal screen size in inches) x 0.1176 + 0.0244
L (m) = (diagonal screen size in inches) x 0.1646 + 0.0651
L (m) = (diagonal screen size in inches) x 0.0166 - 0.0361
PT-D5700/D5700L
H
(Width of
projected image)
0.1H
• Horizontal direction
The projector may be installed at a horizontal
angle of ±10°.
0.1H
Standard postition
of projected image
< 7 >