Preparation - Panasonic PT-D10000 Setup And Operation Manual

Preparation

Preparation
PC
PC
Network Setup
Set the IP address, subnet mask and gateway according to the operating environment. (Consult your network
administrator.
Turn off the proxy setting in the browser or register the IP addresses of the projectors to the proxy exceptions
list.
Projectors
Projectors
Network Setup
Set the host name (projector name), IP address, subnet mask, and gateway. (Consult your network
administrator.)
Set DHCP to OFF and set a fixed IP address, making sure that the entered IP address is not used by
any other device on the LAN.
If the entered IP address is used by another device, the projector cannot be registered.
The host name set for the projector is displayed as the projector name on the software.
Enable Web Control, Network Standby and PJLink Control.
For models in which the Web port number can be set, set the port number to "80."
Others
Disable Input Auto Search.
7