Panasonic PT-D10000 Setup And Operation Manual page 23

To display up-to-date information after the status of a projector has changed due to
operations performed with a remote control or control panel, perform either (a) or (b)
below.
(a) Press the F5 button on the keyboard.
(b) Select File → Update Information on the menu bar (
1
2
1
in the diagram below).
The indication on the status bar
diagram) changes from Ready to Updating
Projector Information and a progress bar
appears on the right side. When the status bar
indicates Ready again, the displayed
information has been updated.
(2 in the left
23