Panasonic PT-AE2000E Spec File page 3

S F
P E C I L
Full High-Definition Home Cinema Projector
Power cord length:
Cabinet material:
Dimensions (W x H x D):
Weight:
Operating temperature:
Operating humidity:
Remote Control Unit
Power supply:
Operation range* 8 :
Dimensions (W x H x D):
Weight:
Supplied Accessories
Optional Accessories
*1: The projector uses a type of liquid crystal panel that typically consists of millions of pixels. This panel is built with very high-precision tech-
nology to provide the finest possible image. Occasionally, a few pixels may remain turned on (bright) or turned off (dark). Please note that this
is an intrinsic characteristic of the manufacturing technology that affects all products using LCD technology.
*2: The projector uses a high-voltage mercury lamp that contains high internal pressure. This lamp may break, emitting a large sound, or fail to
illuminate, due to impact or extended use. The length of time that it takes for the lamp to break or fail to illuminate varies greatly depending
on individual lamp characteristics and usage conditions.
*3: Measurement, measuring conditions, and method of notation all comply with ISO 21118 international standards.
*4: In AI mode, with dynamic iris on.
*5: Shift range is limited during simultaneous horizontal and vertical shifting.
*6: Supports Deep Color and xvYCC color space (effective in Color 1 image mode) of HDMI 1.3a standard.
*7: Lens and legs not included.
*8: Operation range differs depending on environments.
As of September 2007
E
3 m (9´10˝)
PC + ABS
460 x 130 x 300 mm (18-1/8˝ x 5-1/8˝ x 11-25/32˝) *
7.2 kg (15.9 lbs.)
0°–40°C (32°–104°F)
20%–80% (no condensation)
3 V DC (AA type battery x 2)
Approx. 7 m when operated from directly in front of the signal receptor
52 x 200 x 28.5 mm (2˝ x 6-15/16˝ x 7/8˝)
170 g (6 oz.)
Power cord
Wireless remote control unit
Batteries for remote control (AA type x 2)
Replacement lamp: ET-LAE1000
Ceiling mount bracket for high ceilings: ET-PKE2000
Ceiling mount bracket for low ceilings: ET-PKE1000S
Cable cover: ET-PCE2000
Weights and dimensions shown are approximate.
Specifications subject to change without notice.
PT-AE2000
7
< 3 >