Panasonic PT-AE2000E Spec File page 11

S F
P E C I L
Full High-Definition Home Cinema Projector
Notes on Projector Placement and Operation
The projector uses a high-wattage lamp that becomes very hot during operation. Please observe the
following precautions.
1. Never place objects on top of the projector while it is operating.
2. Make sure there is an unobstructed space of 100 mm (3-15/16˝) or more around the projector's air
intake openings.
3. If the projector is placed in a box or enclosure, ensure the temperature of the air surrounding the
projector is between 0°C/32°F and 35°C/95°F. Also make sure the projector's intake and exhaust
openings are not blocked. Take particular care to ensure that hot air from the exhaust openings is
not sucked into the intake openings.
100 mm (3-15/16˝)
or more
Direction of Air Intake and Exhaust
Operating the Projector Continuously
1. If the projector is to be operated continuously 10 hours or more, lamp replacement cycle duration
becomes shorter.
2. The lamp replacement cycle duration becomes shorter if the projector is operated repeatedly for short
periods.
As of September 2007
E
100 mm (3-15/16˝)
or more
PT-AE2000
100 mm (3-15/16˝)
or more
Intake
Exhaust
< 11 >