LG LDFC242 Series Owner's Manual page 26

26 OPERATION
Mode
Small loads & light soil
• Use just the upper rack to save
energy and time.
Small loads & heavy soil
• Use just the lower rack to save
energy and time.
Small loads & heavy soil & light/sensitive
dishes
• Focus on lower rack, but also
operate lightly to wash some light
or sensitive dishes in the upper
rack.
Various conditions
• Place heavily soiled dishes like
plates and bowls in the lower rack
and lightly soiled dishes like cups
and small plates in the upper rack to
get the best results.
High Temp.
Raises the main wash temperature to improve
cleaning.
If the High Temp. option is added to a cycle, the
Sanitized LED stays lit at the end of the cycle if the
heated rinse reached the proper temperature. If
the dishwasher could not properly use the heated
rinse because the High Temp. option was not
Cycle/Option Guide
The cycle guide below shows the available options for each cycle.
Cycle
Soil Level
Water Usage
Wash Time with Options (Mins.)
High Temp.
Available
Options
Night Dry
Delay Start
Description
Auto
All levels
(L) 13.8 - 18.1
(gal) 3.6 - 4.8
90 - 203
Flex Zone
#
#
Extra Dry
#
#
#
selected, the cycle was interrupted or the water
could not be heated to the required temperature,
the indicator will not light up at the end of the
cycle. Open and close the door or press POWER to
turn the indicator off.
Extra Dry
Select the Extra Dry option for better drying
performance. This option adds extra drying time to
the cycle and raises the heated rinse temperature.
• When the rinse aid is empty, the Extra Dry
option is selected automatically.
Night Dry
Dishes are often left in the dishwasher overnight
after the cycle ends. This can result in the steam
inside the tub condensing on dishes, leaving them
wet. This option runs the ventilation fan
periodically to help vent the steam from the tub.
• The Night Dry option is selected by default for
all cycles for which it is available, except the
Normal cycle.
Delay Start
This feature delays the start of a selected cycle.
Each time the Delay Start button is pressed, the
delay time increases by an hour. The delay time
can be set from 1 to 12 hours, in one-hour
increments.
Normal
All levels
9.2 - 19.5
2.4 - 5.2
99 - 191
#
#
#
**
#
#
Heavy Turbo
Heavy Heavy
26.9 27.5
7.1 7.3
141 - 216 60 - 121
# #
# #
# #
**
# #
# #
*
**