Table of Contents
Advertisement
USER GUIDE
First Use
Initial startup requires no adjustments. When plugged
in, the unit will begin operating under the factory default
settings. If the unit was turned off during installation,
simply press
and the unit will immediately switch on. To
turn the unit off, press
NOTICE
Temperature displayed reflects actual
temperature inside unit.
If the temperature displayed is different than selected, the
unit is progressing towards the selected temperature. Time
to reach set point varies based upon ambient temperature,
temperature of product loaded, door openings, etc. U-Line
recommends allowing the unit to reach set points before
loading.
First Use
.
16
Advertisement
Table of Contents
