Table of Contents
Advertisement
Useful Information
Mounting the cordless camera on the wall
Standard mounting
1
Drive the screws (not included) into the
wall at a recommended height of 1.8 m
(5.9 feet) or below using the wall
mount template as a guide (page 19).
(120 V AC, 60 Hz)
Upside down mounting
L The image may be seen upside down when mounting upside down. To compensate for
this, change the cordless camera setting to display images upside down (page 10).
1
Drive the screws (not included) into the
wall at a recommended height of 1.8 m
(5.9 feet) or below using the wall
mount template as a guide (page 19).
18
For assistance, please visit http://www.panasonic.com/phonehelp
50.8 mm
(2 inches)
Screws
50.8 mm
(2 inches)
Screws
(120 V AC,
60 Hz)
2
Mount the cordless camera (A), then
slide it down (B) and to the right (C)
until it is secure.
L To aim the camera lens, see page 9.
2
Mount the cordless camera (A), then
slide it down (B) and to the left (C)
until it is secure.
A
A
B
C
B
C
Advertisement
Table of Contents
