Charging The Battery; Handset Battery Information; Belt Clip - Panasonic KX-TGA520M Installation Manual

Charging the battery

Place the handset on the charger and charge for
6 hours before initial use.
• The unit beeps once, the CHARGE indicator
lights and "Charging" is displayed.
• When the battery is fully charged, "Charge
completed" is displayed if there are no new
calls in the Caller List.
• Recharge the battery when:
— "Recharge battery" is displayed on the
handset,
— " " flashes, or
3
— the handset beeps intermittently while it is in
use.
• If the battery has been discharged, the handset will display "Charge for 6 HRS" and
" " when you place the handset on the charger. The handset will not work unless the
4
battery is charged. Continue charging.

Handset battery information

After your Panasonic battery is fully charged, you can expect the following performance:
While in use (TALK)
While not in use (Standby)
While using the Clarity Booster feature
• Clean the charge contacts of the handset and the charger with a soft, dry cloth
once a month. Clean more often if the unit is subject to grease, dust or high
humidity. Otherwise the battery may not charge properly.

Belt Clip

You can hang the handset on your belt or pocket using the included belt clip.
To attach the belt clip
Operation
To remove the belt clip
While pressing the top of the clip (
pull the right edge in the direction of the
arrow ( ).
2
A
– 2 –
Charge Contacts
CHARGE Indicator
Operating time
Up to 5 hours
Up to 11 days
Up to 3 hours
B
),
1