Table of Contents
Advertisement
80
EN
SYMPTOM
11. The colour of Snapshot looks
strange.
12. Although Snapshot is
attempted, flash does not
take place.
13. Although a Snapshot is taken
with the flash, Red-Eye
Reduction does not take
place.
14. The image taken using
Snapshot is too dark.
15. The image taken using
Snapshot is too bright.
16. Digital Zoom does not work.
Downloaded from:
11. • The light source or the subject
• The Sepia or Monotone mode
12. • The subject is too bright with
• If
• The camcorder is in the
• In the Menu Screen, "GAIN
13. • The subject does not look
• The subject does not look at
• The camcorder is too far from
• "FLASH" is not set to "AUTO
14. • "FLASH" is set to "OFF" in the
• The flash emission window is
• The flash brightness is set to
• The camcorder is too far from
• Shooting was performed
15. • "FLASH" is set to "ON" in the
16. • 10X optical zoom is selected.
• The MODE Dial is set to
• "P.AE/EFFECT" is set to
• "WIDE MODE" is set to "PS-
• Picture Wipe or Dissolve are
https://www.usersmanualguide.com/
TROUBLESHOOTING
POSSIBLE CAUSES
does not include white. Or
there are various different
light sources behind the
subject.
is activated.
the flash set to "AUTO" or
"AUTO
".
blinks, the flash is being
charged.
Record mode.
UP" is set to "OFF" or "P.AE/
EFFECT" is set to
"TWILIGHT".
straight toward the flash.
the first flash, which is an
important part of Red-Eye
Reduction.
the subject.
" in the Menu Screen.
Menu Screen.
covered by fingers, etc..
produce a darker image
(adjustment value: –3).
the subject.
under backlit conditions.
Menu Screen.
"
" or "
".
"VIDEO ECHO" in the Menu
Screen.
WIDE" in the Menu Screen.
being used in a scene
transition.
CORRECTIVE ACTION
11. • Set "FLASH" to "ON" in the
Menu Screen. Or find a white
subject and compose your
shot so that it also appears in
the frame (
pg. 18, 19, 30).
• Turn off Sepia and Monotone
(
pg. 36).
12. • Set "FLASH" to "ON" in the
Menu Screen (
pg. 30).
• It can take up to 10 seconds
to charge the flash.
• Set the camcorder in the
Record-Standby mode
(
pg. 30).
• Set "GAIN UP" to "AUTO
" or "AGC" (
disengage the "TWILIGHT"
mode (
pg. 36).
13. • The subject should look straight
toward the flash, especially the
first flash. If the subject does not
see the first flash, it will be
difficult for Red-Eye Reduction
to take place (
pg. 30).
• The flash is effective for
subjects at a distance of
approx. 0.7 m to 2 m from the
camcorder (
pg. 30).
• Set "FLASH" to "AUTO
in the Menu Screen to display
the Red-Eye Reduction
indicator (
pg. 30).
14. • Set "FLASH" to any position
except "OFF" in the Menu
Screen (
pg. 30).
• Do not cover the flash
emission window.
• Adjust the flash brightness to a
larger value (
pg. 31).
• The flash is effective for
subjects at a distance of
approx. 0.7 m to 2 m
(
pg. 30).
• Press the BACKLIGHT Button
(
pg. 38).
15. • Set "FLASH" to any parameter
other than "ON" in the Menu
Screen (
pg. 30).
16. • Set "ZOOM" to "40X" or
"200X" in the Menu Screen
(
pg. 27).
• Set the MODE Dial to "
or "VIDEO" (
pg. 15, 20).
• Disengage the "VIDEO
ECHO" mode (
pg. 20, 36).
• Disengage the "PS-WIDE"
mode (
pg. 28).
• Wait until the Picture Wipe or
Dissolve effects are completed
(
pg. 20, 34).
(cont.)
pg. 27) or
"
"
Advertisement
Table of Contents
