Display Mode - Panasonic KX-TG7431 Operating Instructions Manual

3
{SAVE}
4
{V}/{^}: "Call block" i
{SELECT}
5
{V}/{^}: "Yes" i {SELECT}
i {OFF}
■ By entering phone numbers:
1
{MENU} (center of joystick) i
{#}{2}{1}{7} i {ADD}
2
Enter the phone number (32
digits max.).
L To erase a digit, press
{CLEAR}.
3
{SAVE} i {OFF}
Block calls without phone number
You can reject a call without phone
number including "Out of area",
"Private caller", or "Long
distance".
1
{MENU} (center of joystick) i
{#}{2}{4}{0}
2
{V}/{^}: Select the desired setting.
i {SAVE} i {OFF}
Viewing/editing/erasing call block
numbers
1
{MENU} (center of joystick) i
{#}{2}{1}{7}
2
{V}/{^}: Select the desired entry.
L To exit, press {OFF}.
3
Proceed with the desired operation.
■ Editing a number:
{EDIT} i Edit the phone
number. i {SAVE} i {OFF}
■ Erasing a number:
{ERASE} i {V}/{^}: "Yes"
i {SELECT} i {OFF}
Note:
L When editing, press the desired dial
key to add, {CLEAR} to erase.
L When viewing, {w/o NUM} appears if
the block calls without phone number
For assistance, please visit http://www.panasonic.com/help
feature is turned on. To turn the
feature off: {w/o NUM} i {V} i
{SAVE} i {OFF}

Display mode

Available for: KX-TGA740 handset
You can select to display either a single
item or multiple items on one screen at a
time for the following features:
– menu list, phonebook list, caller list,
redial list, message list, and call block
list
– handset top menu icons in function
menu
Select the desired setting:
– "Multi items": Multiple entries/all
menu icons are shown on one screen
at a time.
– "Single item": An entry/a menu
icon is shown on one screen in large
characters at a time.
The default setting is "Multi items".
1
{MENU} (center of joystick) i
{#}{1}{9}{2}
2
{V}/{^}: Select the desired setting.
i {SAVE}
3
{OFF}
Note:
L When {MULTI} or {SINGLE} is
displayed as a right soft key on the
handset, you can temporarily switch
the display mode by pressing
{MULTI} or {SINGLE} (page 11).
L When {MULTI} or "Multi items" is
selected as the display mode, you can
move screens by pushing the joystick
right or left, without scrolling down or
up through the list:
– Push the joystick right to go to the
next screen.
– Push the joystick left to return to the
previous screen.
Programming
25