Table of Contents
Advertisement
14
Wall Mount Holder
To install the monitor on a wall, attach a wall mount holder (optional) to the back of the monitor.
Take caution, and ensure that the wall mount holder (optional) is securely fixed to the monitor and to the wall.
The VESA dimensions of the wall mount by model are as follows.
Model
22XE1J
CAUTION
•
Disconnect the power cord first, and then move or install the monitor. Otherwise, it may result in electric shock.
•
If the monitor is installed on a ceiling or inclined wall, it may fall and result in injury.
•
Damage to the monitor by tightening the screws too tightly may void your warranty.
•
Use screws and wall mount plates conforming to VESA standards. Breakage or personal injury due to use or misuse
of inappropriate components is not covered by the warranty of this product.
•
To prevent injury, this apparatus must be securely attached to the wall in accordance with the installation instructions.
(This pertains only to Australia and New Zealand.)
NOTE
•
Using screws longer than the indicated depth may damage the inside of the product. Be sure to use the proper length.
•
For more information on installation, please refer to the user manual for the wall mount.
VESA Dimensions
Standard Dimensions
(A x B) (mm)
100 x 100
A
B
Length (Maximum)
(mm)
M4
8.5
Quantity
4
Advertisement
Table of Contents
