Battery Release Switch; Dc In Connector; Connector - JVC GR-DVL30 Instructions Manual

BATTERY RELEASE Switch

ATTENTION:
Before detaching the power source,
make sure that the camcorder's power
is turned off. Failure to do so can result
in a camcorder malfunction.
AC Power Adapter/Charger
AA-V20EG or AA-V20EK
To DC OUT connector
Downloaded from:
B Push in.
A
Hook on.
To DC IN

connector

Core filter
To AC outlet
DC cord
https://www.usersmanualguide.com/
USING THE BATTERY PACK
1
Hook the non-terminal end of the battery pack to the
camcorder and push the battery pack in until it
locks in place .
•If the battery pack is attached in the wrong position,
a malfunction may occur.
To Detach The Battery Pack . . .
.... slide BATTERY RELEASE and pull out the battery pack.
Approximate recording time
Battery pack LCD monitor on/
Viewfinder off
BN-V207U
(25 min.)
BN-V214U 1 hr. 55 min.
(optional) (60 min.)
BN-V856U
(optional)
( ) : when the video light is on (GR-DVL40/DVL30 only).
NOTES:
● Recording time is reduced significantly under the
following conditions:
• Zoom or Record-Standby mode is engaged repeatedly.
• The LCD monitor is used repeatedly.
● Before extended use, it is recommended that you
prepare enough battery packs to cover 3 times the
planned shooting time.
INFORMATION:
VU-V856KIT is a set composed of the BN-V856U battery
pack and AA-V80EG or AA-V80EK AC Power Adapter/
Charger.
Read the VU-V856KIT's instruction manuals before using.
It is impossible to charge the BN-V856U battery pack
using the provided AC Power Adapter/Charger. Use the
optional AA-V80EG or AA-V80EK AC Power Adapter/
Charger.
USING AC POWER
Use the AC Power Adapter/Charger (connect as shown in
the illustration).
NOTES:
● The provided AC Power Adapter/Charger features
automatic voltage selection in the AC range from 110 V
to 240 V.
● For other notes, pg. 6.
LCD monitor off/
Viewfinder on
50 min. 60 min.
(30 min.)
2 hrs. 20 min.
(1 hr. 10 min.)
7 hrs. 8 hrs. 30 min.
(4 hrs.) (4 hrs. 30 min.)
7
EN