Attaching The Twin Port Bass Blaster Unit - JVC AV-16N311 Instructions Manual

Attaching the Twin Port Bass
Blaster Unit
<AV-21V331/AV-25V331/AV-29V331 only>
The Twin Port Bass Blaster Unit is packaged together with the TV. Before you use the
TV, mount the Twin Port Bass Blaster unit correctly on the TV.
Note:
• The BASS functions do not work unless the Twin Port Bass Blaster Unit is connected correctly to
the TV. For details on the BASS functions, see page 8.
CAUTION:
• The Twin Port Bass Blaster Unit is just placed on top of the TV and is not held in place by a
screw. When using the unit, pay attention to the following cautions. Otherwise, the unit or TV
may fall over and be damaged, or cause unexpected injury.
- Do not rest your hands or elbows on the Twin Port Bass Blaster Unit.
- Do not move the TV with the Twin Port Bass Blaster Unit mounted on top of the TV. Before
you move the TV, be sure to remove the unit.
- Do not move the TV by holding the Twin Port Bass Blaster Unit.
1 Place the unit on top of the TV
making sure that the mounting
pin on the bottom of the unit fits
into the mounting hole on the top
of the TV.
• When you mount the unit, make sure
that the mounting pin fits properly into
the mounting hole. Otherwise, it may
slide off the top of the TV. This may
cause damage or cause unexpected
injury.
2 Firmly insert the Twin Port Bass
Blaster Unit connector into the
BASS SPEAKER OUT terminal.
20
Twin Port Bass Blaster Unit
COMPONENT
VIDEO-1
( VIDEO-2 )
INPUT
S
OVER
V Y
/
V
BASS
SPEAKER
L C
B
/
OUT MONO
R C
R
OUTPUT
INPUT
V
L L
/
MONO
R R