Using The Light Off Function; Using The Auto Clean Function - LG LW1221IVSM Owner's Manual

Hide thumbs

Table Of Contents

Table of Contents

Clean Filter

The Clean Filter LED lights up to notify you

together on the control panel to turn off the

Clean Filter light.

NOTE

●

control panel, not the remote control.

● This feature is a reminder to clean the air

light turns on after 250 hours of operation.

Fan Speed

Press to set the fan speed to Low (F1),

Medium (F2), or High (F3).

Temperature Control

The thermostat monitors room temperature

to maintain the desired temperature. The

thermostat can be set between 60 °F–86 °F

(16 °C–30 °C). Press

increase or decrease temperature setting.

Energy Saver

In this mode the compressor and fan turn

off when the set temperature is achieved.

Approximately every 3 minutes the fan turns

on to allow the unit sensor to accurately

determine if more cooling is needed.

Clear

Cancel Sleep and Timer settings.

NOTE

● Auto Restart: If the air conditioner turns off due

to a power outage, it will restart automatically

once the power is restored, with the same

settings as were set before the unit turned off.

● Energy Saver: The unit defaults to the Energy

Saver mode each time the unit is switched on

except in Fan mode or when power is restored

after an electrical power outage.

● The remote control will not function properly if

the AC infrared sensor is exposed to direct light

or if there are obstacles between the remote

controller and the air conditioner.