Download Print this page

Parameters And Specifications - Denver MT-739 User Manual

Advertisement

SETUP Menu Setting
Preference Page
Old Password
New Password
Confirm PWD
4. Enter the default password 4-digit code.
5. Enter the new 4-digit code.
6. Enter the new 4-digit code a second time to confirm.
The new 4 digit code will be take effect.
7. Press OK to exit.
Helpful Hints:
- If the password has been changed ,the parental and
will also be changed.
- The default password (1369)is always active even the password
has been changed.
Default
Setting the 'Default ' function will reset all options and your personal
settings to the factory defaults and all your personal settings will be
erased.
- -
Preference Page
Audio
ENG
Subtitle
ENG
Disc Menu
ENG
Parental
Password
Default
Load Factory Setting

Parameters and specifications

Battery Parameters
Battery Specifications£º
Output£º7.4V
Charge / Discharge Time£º
1.Standard charge time£º3h ~ 5h
2.Standard discharge time: 2 hours
Storage and work circumstances£º
1. Storage circumstances Temperature
6 months
1 week
2.Work circumstances
Standard charge
Standard discharge
OK
disc lock code
Dolby
- -
Reset
Humidity
-20 C ~ +45 C
65+20%
-20 C ~ +65 C
65+20%
Temperature
Humidity
0 C ~ +45 C
65+20%
-20 C ~ +65 C
65+20%
1.Press
to highlight 'Default ' .
2.Highlight Reset by pressing
3.Press ENTER to confirm selection.
Caution!
- When this function is activated,all settings will be reset to
factory defaults.
Maintenance and Service
Refer to the information in this chapter before contacting a service
technician.
Handling the unit
When shipping the unit
Please save the original shipping carton and packing materials.
If you need to ship the unit, for maximum protection,re-pack the
unit as it was originally packed at the factory.
Keeping the exterior surfaces clean
Do not use volatile liquids such as insecticide spray near the unit.
Do not leave rubber or plastic products in contact with the unit for a
long period of time. since they leave marks on the surface.
Cleaning the unit
To clean the player, use a soft, dry cloth. If the surfaces are
extremely dirty, use a soft cloth lightly moistened with a mild
detergent solution.
Do not use strong solvents such as alcohol, benzine,or thinner,
as these might damage the surface of the Unit.
Maintaining the unit
The DVD player is a high-tech, precision device. If the optical
pick-up lens and disc drive parts are dirty or worn, the picture
quality could be diminished. Depending on the operating
environment,regular inspection and maintenance are recommended
after every 1,000 hours of use. For details,please contact your
nearest authorized service center.
.
12

Advertisement

loading