Download Print this page
Xo XOU24WWG Series Owner's Manual

Xo XOU24WWG Series Owner's Manual

Wine & weed preservation systems
Hide thumbs Also See for XOU24WWG Series:

Advertisement

Quick Links

XOU24WWG_
WINE & WEED PRESERVATION SYSTEMS
WATCH THE INSTALLATION
VIDEO ON OUR CHANNEL
I worked really hard
on this manual -
so please read it...

Advertisement

loading

Summary of Contents for Xo XOU24WWG Series

  • Page 1 WATCH THE INSTALLATION VIDEO ON OUR CHANNEL XOU24WWG_ I worked really hard on this manual - WINE & WEED PRESERVATION SYSTEMS so please read it...
  • Page 3: Where Things Are

    Electrical and Grounding Instructions 8 - 1 4 Installation Instruc tions Sizes and Installation Dimensions Integrated Panel Dimens ions Leveling Your XO O p erating In struc tions 15 - 20 Product Over view Preservation Tips Control System O ver view...
  • Page 4 the job isn’t done until To ensure that the installation process is successfully completed, here are few things to review... Is the unit plugged in? Are the controls on? (Panel will illuminate.) Are the controls operating correctly? Has the unit been properly leveled - both side to side and front to back - with all 4 leveling feet securely making contact with the floor? This is an OVERLAY unit - have the panels been securely attached and properly aligned? After installation, does the door open sufficiently to fully extend the shelves?
  • Page 5 these are the models covered in this book WINE & WEED VAULT XOU24WWGO_ Panel Ready XOU24WWGS_ SS & Glass XOU24WWGB_ Black Glass take a minute to circle your model above and record your serial number here in case you need it later...
  • Page 6 For maximum efficiency, keep the door tightly shut unless loading or unloading and never overload your XO unit. Before installing, allow your XO unit to sit upright for 2 hours at the install site. This will allow the cooling system to stabilize after transportation. Failure to follow this step may cause problems.
  • Page 7 Damages caused by ambient extremes are not covered by the warranty Your XO unit is built to operate on 115V 60Hz and should be plugged directly into a dedicated 15 amp 3 prong outlet. If you are uncertain as to the...
  • Page 8 - or - install under counter ALL XO UNDERCOUNTER UNITS ARRIVE PRE-WIRED WITH LOW PROFILE PLUGS FOR EASY INSTALLATION 34 1/4” MIN 7" 4" 24” WHEN INSTALLING WITH THE HINGE SIDE NEXT TO A WALL -...
  • Page 9 ( or small, as the case would be height & width XOU24WWGO_ & XOU24WWGS_ 24” MODELS 1/8" HIGH 23 7/8" WIDE depth MODELS WITH OVERLAY DOORS DOOR MUST BE ABLE TO OPEN...
  • Page 10 1” deep into the top and bottom of the frame in the location shown. COPY AND CUT OUT 5/16” Dia. OUTSIDE THESE HANDY HOLE TEMPLATES 3/4” FRAME 3/8” DOOR SIDE 13/32” ” PANEL MAXIMUM WEIGHT: 20 lbs. * FOR CABINET DOORS LONGER THAN 30” - CONSULT XO.
  • Page 11 let’s face it BEFORE BEGINNING - REST THE UNIT ON ITS BACK, WITH THE DOOR FACING UP 1. Remove the two screws that hold the toe kick in place. Remove the toe kick and set aside. 2. Remove the three screws holding the lower hinge in place. Remove the hinge and set aside.
  • Page 12 8. Remove the clamps and re-install the rubber gasket by pressing it into the slot making sure it is evenly seated. 9. Place the door back in position and slide to up onto the upper hinge pin, then square it up with the cabinet.
  • Page 13 get a grip Handle Options - all handles will fit all models A. Designer Round Handle Stainless ships with XOU24WWGS* Also available as an option in black B. Pro Style Round Handle Stainless ships with XOU24WWGS* C. Designer Flat Handle Stainless ships with XOU24WWGB The XOU24WWGS - Stainless framed glass door model comes with both styles A &...
  • Page 14 it’s like zen - but cooler get your level out DO NOT NEGLECT THIS IMPORTANT STEP Rotate to raise or lower the LEVELING LEGS located at each of the four corners until all four legs are seated firmly on the floor and the interior floor of the unit is level both front to back and side to side.
  • Page 15 LEVELING LEGS WHAT’S THAT NOISE... You new XO is designed for quiet operation but you may hear some sounds your old unit didn’t make. Because they are new you might be concerned, but they are usually normal. Sounds can also be amplified by hard surfaces like flooring or tiles. Here is a description of the types of sounds you might hear and what might be causing them.
  • Page 16 THC to CBN helping preserve flavor, aroma and potency. VIBRATION: Vibration is another element that can harm wine. Your XO Wine & Weed has design features to aid in limiting the transmission of vibration to the bottles, however it is advisable to install your wine &...
  • Page 18 XO Recommends the use of BOVEDA Humidity packs to help prevent the evaporation of terpenes in storage jars Size 4 | 58% RH The two compartmentalized wooden drawers come complete with twelve (12) tall glass display storage jars and four (4) short glass jars.
  • Page 19: Take Control

    take control temperature Wine & Weed Systems maintain two different temperature zones from one control panel. Dual Zone Temperature Settings Adjustable Range: 55 F to 68 F (upper) 50 F to 64 F (lower) Your unit remembers your last temperature settings in the event of a power failure and automatically adjusts to the previous setting(s) when power is restored.
  • Page 20 Press the icon again and the lights will change to honey amber. When you turn your XO Unit on, it is set to work in Standard Mode. Press and ECO Mode is turned on, ECO Mode is an energy saver function.
  • Page 21 dual zone control 2 zone wine & weed preservation ON /OFF But ton Press & Hold for 1 Second to turn ON Press & Hold for 3 Seconds to turn OFF Press to Sile nce Alarm Light Function But ton Toggle Bet ween 3 Light Functions L1, L2, L3 Indicator Light...
  • Page 22 Door Surface - Use only mild, non-abrasive detergents applied with a clean sponge or soft cloth. Rinse well with damp cloth. NOTE: Do not use cleaners containing ammonia or alcohol on your XO unit. Ammonia or alcohol can damage the appearance of the appliance.
  • Page 23 This may be a sensor malfunction. Unplug the unit and call for service. more “q & a” Why does condensation form on the inside or outside of my XO unit? It may be that the door is either opened repeatedly or not closed completely. It may also be due to an excessive ambient humidity, in which case it will clear when the humidity drops.
  • Page 24: Warranty

    OUTSIDE U.S. This warranty does not apply to, and XO is not responsible for, any warranty claims made on products sold or used outside the 48 continental United States.

This manual is also suitable for:

Xou24wwgoXou24wwgsXou24wwgb