Levelling; Location - AEG S60246DT User Manual

32
Installation
1. Fit the spacers into the holes. Make sure
that the arrow (A) is positioned as shown
in the picture.
2. Turn counter-clockwise the spacers
through 45° until they lock into place.

Levelling

When placing the appliance ensure that it stands
level. This can be achieved by two adjustable feet
at the bottom in front.

Location

The appliance should be installed well away from
sources of heat such as radiators, boilers, direct
sunlight etc. Ensure that air can circulate freely
around the back of the cabinet.To ensure best
performance, if the appliance is positioned below
an overhanging wall unit, the minimum distance
between the top of the cabinet and the wall unit
must be at least 100 mm . Ideally, however, the
appliance should not be positioned below over-
hanging wall units. Accurate levelling is ensured
by one or more adjustable feet at the base of the
cabinet. If the cabinet is placed in a corner and the
A
45˚