Table of Contents
Advertisement
7. Cautions and Compliance
Please review the following cautions and warnings.
Environmental specifications
Operating temperature: Refer to the product datasheet
If you install your Fortinet product in a closed or multi-unit rack assembly, the operating ambient temperature of the
rack environment may be greater than room ambient temperature. Therefore, make sure to install the equipment in
an environment compatible with the manufacturer's maximum rated ambient temperature.
Storage temperature: Refer to the product datasheet
Humidity: Refer to the product datasheet
Air flow: For rack installation, make sure that the amount of air flow required for safe operation of the equipment is
not compromised.
For free-standing installation, make sure that the appliance has at least 1.5 in. (3.81 cm) of clearance on each side
to allow for adequate air flow and cooling.
FCC Compliance
FCC Compliance: Refer to the product datasheet
Operation is subject to the following two conditions:
This device may not cause harmful interference, and
This device must accept any interference received, including interference that may cause undesired operation.
The Fortinet product has been tested and found to comply with the limits for a Class B digital device, pursuant to
part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
The equipment complies with FCC radiation exposure limits set forth for uncontrolled environments
Caution:
Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to your
local regulations.
Grounding
Ensure your Fortinet product is connected and properly grounded to a lightning and surge protector. WAN or LAN
connections that enter the premises from outside the building should be connected to an Ethernet CAT5 (10/100
Mb/s) surge protector.
Shielded Twisted Pair (STP) Ethernet cables should be used whenever possible rather than Unshielded Twisted
Pair (UTP).
Do not connect or disconnect cables during lightning activity to avoid damage to your Fortinet product or personal
injury.
Electrostatic discharge (ESD) can damage Fortinet equipment. Only perform the procedures described in this
document from an ESD workstation. If no such station is available, you can provide some ESD protection by
wearing an anti-static wrist strap and attaching it to an available ESD connector or other bare metal object.
Bureau of Standards Metrology and Inspection (BSMI) – Taiwan
The presence conditions of the restricted substance (BSMI RoHS table) are available at the link below:
https://www.fortinet.com/bsmi
8. Register Your Product
If you have not yet registered your Fortinet product, please register your product
now.
Register
Register your Fortinet product in order to receive:
• Technical Support • New product features • Protection from new threats
Enregistrer
Vous devez enregistrer le produit pour recevoir:
• Support technique • Nouvelles fonctionnalitées du produit • Protection contre
de nouvelles menaces
Registra
La reistrazione ti permette di usufruire di:
• Supporto Tecnico • Nuove funzionalita • Proteezione dalle ultime minaccce
Registrar
Debe registrar el producto para recibir:
• Apoyo técnico • Nuevas funcionalidades del producto • Protección contra
ataques
登録のお願い
.
本日、 フォーティネッ ト製品の登録をしてください。
登録すると次のメリッ トがあります。
テクニカルサポート • 新機能の追加 • 新しい脅威への防御
请马上注册
您的飞塔产品
您在注册以后才能得到技术支持、新产品特点信息、最新威胁防护
Web: http://www.fortinet.com/register
Toll free: 1-866-648-4638
Phone: 1-408-486-7899
Fax: 1-408-235-7737
Email: register@fortinet.com
Advertisement
Table of Contents
