opti-solar SC Series Installation And Operation Manual page 19

2-4 Adjustability of Lighting Control
When setting in the lighting control mode, DIP Switch 7 should be placed at ON. After
completing the system connections, select the desired LIGHTING CONTROL switch
option. The brief description of the options follows below:
Lighting control
Switch
To select a lighting control option, turn the rotary digital switch to the desired position.
An arrow in the rotary switch will point to the selected position. This is a digital switch,
so it will click into each of the sixteen positions.
To confirm correct selection of the desired control option, press the LIGHT TEST button
to enter the testing mode.
Lights remain turned off.
OFF:
Hours light is turned on after sunset.
2,4,6,8,10:
Light is turned on after sunset, turned off after the selected
2/1, 3/1, 4/1,
lasting hours, and turned on again before sunrise.
6/1, 2/2, 3/2,
2/1: Light is turned on for two hours after sunset, turned off
4/2, 6/2, 8/2:
after two hours and turned on again one hour before sunrise.
D/D: Dusk-to-Dawn, light is on all night
19