Moving The E-Bikelifter - e-Bikelifter BM-60-S Instruction Manual

7.5 Moving the e-Bikelifter

Moving the e-Bikelifter:
1: Place yourself behind the
e-Bikelifter. Grab on to the two
handles.
Note:
The e-Bikelifter must be free of any object and cargo.
l
The sledge should be lowered to under 800 mm.
l
The e-Bikelifter must be turned OFF.
l
Always hold on to the handles when moving the e-Bikelifter.
l
Parking the e-Bikelifter:
4: Place one foot against the
wheel axle, and tilt the lifter for-
ward until it reaches the ground.
Note:
The e-Bikelifter must stand on a hard and leveled surface.
l
No obstacles or objects must be below the base plate of the e-Bikelifter.
l
The e-Bikelifter must stand firmly and must not swing, when stepping on the base plate
l
2: Place one foot against the wheel
axle (between the wheels)
5: Rotate the two knobs to adjust the height of the back feet.
All four adjustable feet (2x front, 2x back) must be in contact with the
floor before using the lifter.
www.e-bikelifter.com
3: Pull back towards yourself, until
the e-Bikelifter balances on its
wheels. Steer it with the handles
11