Dual Stage Shock Sensor; 10.Trunk Release; 11.Query Function; 12. Panic Mode - CompuSTAR 2WSHR LED User Manual

Two-way am remote
Table of Contents

Advertisement

7
Note :
If you lose your remote after you have armed the vehicle, use your
key to open the vehicle. The siren will go off. Turn on and off ignition 5
times with your key to shut off the siren and turn the system into valet
mode. Cancel the valet mode with remote later. See Valet mode.
Note :
(Siren duration is 30 to 60 sec depending on the options set at the
time of initial installation.)

Dual Stage Shock Sensor

Press buttons
for 2 seconds to activate or deactivate the dual stage
+
shock sensor. The dual stage shock sensor will activate 30 seconds after the
Compustar alarm is armed. When the dual shock sensor is engaged, the
remote-pager security alerts will be triggered by the following:
Light impact to your vehicle will activate the
the car siren will chirp 4 times in addition to the parking lights flashing 4 times.
The remote pager unit will beep and the
Heavy impact to your vehicle will activate the
sensor
and the car siren will sound for 30 to 60 seconds and the parking lights
will flash for 30 to 60 seconds. The remote-pager will beep
Icon rapidly.
Press the
button for a 1/2 second to turn off the second stage shock sensor
sirens and flashing lights.
first stage shock sensor
and
icon flashes rapidly.
second stage shock
Both sound &
Press the
button for 2 seconds in order to unlock and release your trunk
door. Note that the trunk release function will not only release the trunk but will
unlock all the doors as well.
Query Function allows you to visually monitor the status of your car by looking
at the remote-pager LED icons. Press buttons
to activate the Query Function.
Press the
button for 2 seconds to enter Panic Mode. In this mode, the car
will arm if not armed already and the siren will activate and the parking lights will
flash. In order to disengage Panic Mode, press the
Then, press the
button for a 1/2 second to lock/arm your vehicle.
If Anti-Jacking option has been programmed (ask your dealer if you
like to have this option) and the Ignition-Kill has is been installed , the
Panic Mode works as Anti-Jacking if the key is in the ignition. If Anti-
Jacking mode is activated while key is in the ignition ;
a)Siren will go off for 1.5 minutes, and b) Ignition-Kill will be activated
after the first 30 seconds. That is to give warning to the hijacker for the
first 30 seconds and then to disconnect the ignition to stop the vehicle.
8
Trunk Release
Query Function
for a 2 second
+
Panic Mode
button for a 1/2 second.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 2WSHR LED and is the answer not in the manual?

Questions and answers

Table of Contents

Save PDF