Table of Contents
Advertisement
2-5.2 Network
2-5.2.1 Limit Control
This section shows you to to configure the Port Security settings of the Switch. You can use
the Port Security feature to restrict input to an interface by limiting and identifying MAC
addresses.
Web Interface
To configure a Configuration of Limit Control in the web interface:
1. Select "Enabled" in the Mode of
2. Checked Aging Enabled.
3. Set Aging Period (Default is 3600 seconds).
To configure a Port Configuration of Limit Control in the web interface:
1. Select "Enabled" in the Mode of
2. Specify the maximum number of MAC addresses in the Limit of
3. Set Ation (Trap, Shutdown, Trap & Shutdown)
4. Click Apply.
Figure 2-5.2.1: The Port Security Limit Control Configuration
Configuration.
System
Configuration.
Port
62
barox Kommunikation
Configuration.
Port
Publication date: Sept., 2015
Revision A2
Advertisement
Table of Contents
