Table of Contents
Advertisement
Log in to the Web Interface
1
Connect your computer to the Gateway using wired or wireless connection. A computer connected
using ethernet cable is strongly recommended.
2
Open a web browser (such as Internet Explorer, Google Chrome, Safari or Mozilla Firefox), type
following address into the address bar and press Enter.
http://192.168.20.1
3
Enter Gateway Login Username and Password printed on the label at the bottom of the Gateway and
press Login.
4
Please select Wi-Fi Main page and make sure Wireless is Enabled.
Note – This is applicable for 2.4 GHz band only.
CF40MESH – Wireless Reception & Dropout Troubleshooting Guide
FA01369 v. 1.01 8 February 2023
3 of 4
Advertisement
Table of Contents
Need help?
Do you have a question about the NetComm CF40MESH and is the answer not in the manual?