Table of Contents
Advertisement
Answering Calls
When a call is received, the unit rings and "Incoming call" is
displayed and the IN USE/CHARGE indicator on the base unit flashes. If
you subscribe to a Caller ID service, the calling party information will be
displayed after the first ring (p. 28).
In order to view the Caller ID information, please wait until the second ring
to answer a call.
Handset
If the handset is off the base unit;
Press
.
•You can also answer a call by pressing any dialing
button (0) to (9), (*) or (#) (—Any Key Talk).
OR
Press
, and when the other party answers,
talk into the microphone.
•You can select the ringer volume while a call is being received. Press Ö or Ñ
while the handset is just ringing. To set to OFF, press and hold Ö.
Auto Talk
If you set the Auto Talk feature to ON
(p. 17), you can answer a call by lifting the
handset off the base unit without pressing
or
.
Base Unit
Press
1
(SP-PHONE)
•The SP-PHONE indicator lights.
Talk into the MIC.
2
3
To hang up, press
•The indicator light goes out.
•You can select the ringer volume while a call is being received. Press
(MUTE/RINGER) while the base unit is just ringing. To set to OFF, press and
hold (MUTE/RINGER).
•When the handset and base unit ringer volumes are set to OFF, they will not ring
(p. 18).
For assistance, please call: 1-800-211-PANA(7262)
.
.
(SP-PHONE)
IN USE/CHARGE Indicator
MIC (SP-PHONE) and Indicator
Microphone
27
Advertisement
Table of Contents
