Macab DT-2200 Manual page 8

MANUAL
DT-2200
Programmering
All programming is done using the Menu-Enter-Up-Down-Left-Right
buttons and the DT-2200 display.
TRANSPONDER FREQUENCY "IF FREQUENCY"
Press the Menu button.
MENU
Use the Up/Down buttons to specify a number.
Use the Left/Right buttons to move between the numbers.
Press the Enter button to save and move on to the next menu
ENTER
option.
The value of the setting of frequency (If frequency) depends on the local
oscillator frequency (L.O.) on the microwave head (LNB).
The frequency of the satellite channel – L.O. frequency (LNB) =
Intermediate frequency (IF) which is to be set.
Example
A satellite channel with frequency 11 309 and LNB of L.O. 9 750.
=
MF = 11 309 – 9 750 1559
POLARIZATION
Use the Up/Down buttons for selecting the desired polarity H/V.
Press the Enter button to save and jump to the next menu
ENTER
selection.
22KHZ
Use the Up/Down buttons 22kHz (Choose On or Off ).
Press the Enter button to save and jump to the next menu
ENTER
selection.
56
01042-4 DT-2200 ENG-1.p65
is the frequency to be set.
56
ENTER TRANS
FREQ 1559
ENTER
POLARITY H
22KHZ
OFF
2001-09-26, 08:46