Table of Contents
Advertisement
-
For example, if an abrasive wheel is snagged or pinched by the workpiece, the edge of the wheel
that is entering into the pinch point can dig into the surface of the material causing the wheel to
climb out or kick out. The wheel may either jump toward or away from the operator, depending on
direction of the wheel's movement at the point of pinching. Abrasive wheels may also break
under these conditions.
-
Kickback is the result of power tool misuse and/or incorrect operating procedures or conditions
and can be avoided by taking proper precautions as given below:
o
Never place your hand near the rotating accessory. Accessory may kickback over your hand.
o
Do not position your body in the area where power tool will move if kickback occurs.
Kickback will propel the tool in direction opposite to the wheel's movement at the point of
snagging.
o
Use special care when working corners, sharp edges etc. Avoid bouncing and snagging the
accessory. Corners, sharp edges or bouncing have a tendency to snag the rotating
accessory and cause loss of control or kickback.
Residual risks
Even if you use this tool correctly, there are always residual risks. The following hazards may
arise in connection with the structure and manufacture of this power tool:
-
Hearing impairment if no suitable hearing protection is worn.
-
Cuts if no suitable protective clothing is worn.
-
Health damage resulting from vibration in the hands and arms if the device is used for a
long period of time or is not handled and maintained properly.
-
Inhalation of particles
-
Inhalation of exhaust gases
-
Skin contact with oil / gasoline
-
Inhalation of gasoline / oil vapors
-
Contact with projected objects
-
Burns when touching with hot surfaces
-
Prolonged use of this product exposes the operator to vibration and can produce so-called
"white finger" disease. To reduce the risk, wear gloves and keep your hands warm.
-
If any of the symptoms of "white finger syndrome" occur, seek immediate medical attention.
Symptoms of the "white finger" include numbness, loss of sensitivity, tingling, pain, loss of
strength, colour changes or skin condition. These symptoms usually appear on the fingers,
hands or wrists. Risk increases at low temperatures.
-
Loss hearing in case of prolonged use and when a hearing protection is not worn.
To minimize those risks, follow the instructions of this manual about wearing personal equipment of
protection, take some rest during the operation and the manipulation of the tool. Do not work for a
prolonged time.
Safety instructions for the hedge trimmer
WARNING! Before using this tool, please read these instructions of safety and use. It
will help you to use safely the machine and reduce the risk of electrical shocks and
accidents. If you give this tool to another person, also give this manual.
Use this tool as described in this manual. Any mishandling and any use contrary to
instructions will not in any way engage the liability of the manufacturer.
Non-compliance with safety instructions and use can cause a risk of electric shock, fire
and / or injury to persons.
5
Advertisement
Table of Contents
