Using the Handset Phonebook
Entering Characters
Entering Characters
You can enter characters and digits using the dialing keys.
You can select one of 3 character modes by pressing the Right Soft Key
while entering a name. The function icon above the soft key displays the
current character mode.
See "Character Mode Table" (page 43) for available characters.
To change the character mode while editing a name in the Phonebook, press the Right Soft Key.
Alphabet
Example: To enter "Anne" in Alphabet Mode.
•
To switch between uppercase and lowercase, press
•
To enter a character located on the same dialing key as the previous character, move
the cursor by moving the Joystick
•
If you enter a different character by mistake, move the Joystick
character, press
•
To clear an entire line, press
•
To move the cursor, move the Joystick
42
, then enter the desired character.
to delete it, then enter the correct character.
for more than 1 second.
Numeric
.
.
A, a
B, b
C, c
2
Extended
to highlight the
Document Version 2008-01