Table of Contents
Advertisement
32
PROGRAMMING MODE - SETUP MODE
8. how to change special hot price
Entering set up
mode.
You will see LqC1
NOTE
• Price setting varies by country
• Set your country from
• After EEPT, reset your country (Default country is KOR)
Press the Hot button.
Press the Warm or the Cold button until
in the display.
Press the Start button.
Press the Warm or the Cold button until
in the display.
Press the Start button.
Display previous special hot price.
Press Warm(+) or Cold(-) button to set the special hot
price.
(The vend price can be set from 0 to 9500 in 100
increments.)
Press the Start button.
The machine sets up the special hot price, then
advances to the next process automatically.
1. Continue to set up the next price.
2. Stop the change of setup value and go back to ready
mode.
• Coin type - Turn on/off toggle switch.
• Card type - Pull the service card.
• OPL type - Push the Hot button twice.
mode (Refer How to enter the
Button
Display
appears
appears
)
Advertisement
Table of Contents
