EMG PRO SL-20 Installation Information

INSTALLATION INFORMATION
EMG MODEL: SL-20
(PRO-SERIES ASSEMBLY)
General INFORMATION:
The SL-20 is a pre-wired pickguard assembly that has been used by Steve Lukather (Toto / Studio) since 1985. It has 2 EMG-SLV Single Coil
Pickups (that were designed with Steve), and the EMG-85 Pickup in the bridge position. The System features a Single Master Volume and Tone
Control (Passive) and a 3 position selection switch. Both the EMG-SLV Pickups and the EMG-85 have Alnico Bar magnets for High Output and
great sustain.
0.025 LOG FREQ (kHz)
SPECIFICATIONS:
Logo Color
Magnet Type
Resonant Frequency (KHz)
Output Voltage (String)
Output Voltage (Strum)
Output Noise (60 Hz)
Output Impedance (Ohm/System)
Current @9V (Microamps/Complete System)
Battery Life (Hours)
Supply (Volts DC)
Warranty
All EMG Pickups and accessories are warranted for a period of two years. This warranty does not cover failure due to improper installation, abuse or damage. If
upon examination the pickup is determined to be defective, a replacement will be made. Warranty replacement products are covered by this same warranty. This
warranty covers only those pickups and accessories sold by authorized EMG Dealers. This warranty is not transferable.
© 2009 Copyright EMG INC. All Rights Reserved.
SL-20 Page 1
10
MODEL:
SLV Pickup
Gold
Alnico
3.75
1.00
1.50
-90
10K
260
1000
9
VOLUME
TONE
85 Pickup
Gold
Alnico
2.45
2.10
4.50
-89