Page 1
Инструкция по использованию гитарного комплекта звукоснимателей EMG VG20 VINCE GILL (на английском языке) • Технические характеристики • Схемы подключения для различных конфигураций в картинках...
Page 2
General INFORMATION: The VG-20 is a pre-wired pickguard assembly that has been used by Vince Gill since 1996. It has 3 of our EMG-S Pickups installed and features a 5 position selection switch, standard passive tone control (High-End rolloff) as well as our SPC Accessory circuit. The S Pickups feature a Ceramic Bar magnet for bright tone and amazing sustain.
Page 3
2) Unscrew the existing Output Jack Plate (2 screws) and either unsolder or cut the 2 wires going to the existing output jack. 3) Remove the existing Output Jack and install the 12B Stereo Jack included with the VG-20 System.