Elan EL-4KM-V44-18G Quick Reference Manual

®
The ELAN 4x4 HDBaseT matrix offers unprecedented performance and value for the custom installation market. The EL-4KM-V44-18G is a
HDMI 2.0 4K 60Hz 4:4:4 HDCP 2.2 matrix utilizing CSC technology to deliver HDMI, bi-directional IR and PoC up to lengths of 70m over a single
CAT cable. The matrix also provides advanced features including simultaneous HDBaseT / HDMI on output 1, video down conversion on HDBaseT
outputs and a web browser interface module for control and configuration of the matrix.

Panel Description

Front
®
EL-4KM-V44-18G
1
IR Receiver - Built in IR sensor for IR pass through
2
Output LCD - Shows the currently selected output
3
Output Up / Down Button - Press to adjust the selected output up or down
4
Input Up / Down Button - Press to adjust the selected input up or down / Press and hold Input Up to power the matrix on or off
5
Input LCD - Shows the currently selected input
Please note: Press and hold Output Up and Input Down for 10 seconds to factory reset the matrix.
Rear
1 2 3
IR CTRL TCP/IP RS-232
INPUTS
HDMI 1 HDMI 2 HDMI 3
6
1
IR Control Input - 3.5mm stereo connector to connect to
ELAN 5V 3.5mm IR receiver for IR control of the matrix
2
TCP/IP - RJ45 connector for TCP/IP and Web GUI control
of the matrix
3
RS-232 - DB9 connector for RS-232 control of the matrix
4
IR Receiver Output - 3.5mm mono connector to connect to
ELAN 5V 3.5mm IR emitter. Used for local Source control

RS-232 Configuration

The RS-232 port is used for configuration and control of the product, as well as pass through of RS-232 commands to a compatible ELAN HDBaseT receiver / matrix device.
The default RS-232 communication settings are:
Baud Rate: 57600
Data Bit: 8
Stop Bit: 1
Parity Bit: none
For a complete RS-232 command list please see the EL-4KM-V44-18G user manual - available to download from www.elancontrolsystems.com
© 2022 ELAN ® is a registered trademark of Nortek Security & Control LLC. All rights reserved.
RevA3_QRG_ELAN_EL-4KM-V44-18G_Working.indd 1 RevA3_QRG_ELAN_EL-4KM-V44-18G_Working.indd 1
EL-4KM-V44-18G
Quick Reference Guide
4
IR OUTPUTS
1 2 3 4
HDMI 4
5
IR INPUTS
1 2
OUTPUTS
HDMI 1 HDBT 1 HDBT 2 HDBT 3 HDBT 4
MIRRORED
7 8
5
IR Receiver Input - 3.5mm stereo connector to connect to
ELAN 5V 3.5mm IR receiver or Control Processor. Used to
extend IR from Matrix to HDBaseT Outputs 1-4
6
HDMI Inputs - Connect to source devices
7
HDMI Output - Connect to display device
8
HDBaseT Outputs - RJ45 HDBaseT port to connect to
the HDBaseT input port of the compatible ELAN HDBaseT
receiver
9
IEC Power Socket - Use supplied IEC power cable
EL-4KM-V44-18G QUICK REFERENCE GUIDE
OUTPUTS INPUTS
OUTPUTS INPUTS
1 2 3 4 5
3 4
RevA3_QRG_ELAN_EL-4KM-V44-18G_PrintReady
100-240VAC IN
9
25/02/2022 11:09 25/02/2022 11:09