Setting Up The Monitor; Installation - Philips 200S4LYMB User Manual

2. Setting up the monitor

2. Setting up the monitor

2.1 Installation

Package contents
Audio
VGA (Optional)
Install the base
1. Place the monitor face down on a smooth
surface. Pay attention not to scratch or
damage the screen.
2. Snap in the base in the VESA mount area.
200S4
使用产品前请阅读使用说明
保留备用
DVI (Optional)
4
3. Hold the base with both hands.
(1) Gently attach the base to the column
until the three guiding pins rest into the
position holes.
(2) Use your fingers to tighten the screw
located at the bottom of the base, and
secure the base to the column tightly.
2
1