Table of Contents
Advertisement
Volume
Adjust the
Volume
controlling the JOG button LEFT/RIGHT.
Eco Saving Plus
The
Eco Saving Plus
function reduces power consumption by controlling the electric current used by the
monitor panel.
― This menu is not available when
Eye Saver Mode
•
Off: Deactivate the
Eco Saving Plus
function.
•
Auto: The power consumption will automatically be reduced by about 10% over the current setting.
(The reduction of power consumption depends on the customer screen brightness condition.)
•
Low: The power consumption will be reduced by 25% over the default setting.
•
High: The power consumption will be reduced by 50% over the default setting.
Off Timer
Off
Timer: Turn on
Off Timer
mode.
Turn Off
After: The off timer can be set within a range of 1 to 23 hours. The product will automatically
power off after the specified number of hours.
― This option is only available when
Off Timer
― For products for the market in some regions, the
product powers on. This is done in accordance with power supply regulations. If you do not want the timer to
→
System
Off Timer
activate, go to
and set
is enabled.
is set to On.
Off Timer
is set to automatically activate 4 hours after the
to Off.
PC/AV Mode
Set
PC/AV Mode
to AV. The picture size will be enlarged.
This option is useful when you view a movie.
•
Set to
PC
when connected to a PC.
•
Set to
AV
when connected to an AV device.
― Supplied for the wide models only such as 16:9 or 16:10.
― If the monitor is in HDMI1, HDMI2,
DisplayPort
mode activates, press the JOG button to display the function-button screen and then select the
can select
PC
or AV.
DisplayPort Ver.
Select your Displayport. Displayport 1.1 supports High Bit Rate 1, while 1.2 supports High Bit Rate 2.
― Incorrect settings may cause the screen to go blank. If this occurs, check the device specifications.
― If the monitor (when set to HDMI1,
HDMI2
or DisplayPort) is in power saving mode or is displaying the
message
Check Signal Cable
or power saving mode activates, press the JOG button to display the function-
button screen and then select the
button to display the On Screen Display (OSD). You can select
mode and the screen says
Check Signal Cable
or power saving
icon. You
1.1
or 1.2.
35
Advertisement
Table of Contents
