Technovision PDVR-E8W1N2-AI Quick Start Manual And Manual page 87

Step 2 Configure the settings for the zero-channel parameters.
Parameter
Enable
Compression
Resolution
Frame Rate
(FPS)
Bit Rate (Kb/S)
Step 3 Click Apply to save the settings.
In the live interface on the web, click
multi-channel modes, and then you can view the local video image.
5.2.8.3 Configuring TV
Not all models support this function.
You can adjust the border margins in top, bottom, left and right directions as well as the
brightness of the monitor connected to the Video out port of the Device.
Step 1 Select Main Menu > DISPLAY > TV Adjust.
The TV Adjust interface is displayed.
Figure 5-48
Description
Enable zero-channel function.
In the Compression list, select the video compression standard
according to the device capability. The default is H.265.
In the Resolution list, select the video resolution. The default is
704×576 (D1).
Select a value between 1 and 25 for PAL standard, and between 1
and 30 for NTSC standard. The actual arrange is decided and
selected dependent on the Device capability.
The default value is 1024Kb/S. The actual arrange is decided and
selected dependent on the Device capability and frame rate.
Table 5-17
Local Configurations 71
to select one of the