Technovision PDVR-E8W1N2-AI Quick Start Manual And Manual page 253

Step 2 Select the Enable check boxes to enable IoT function.
The Device starts detecting the temperature and humidity data from the camera and
display on the Realtime Display interface.
Step 3 (Optional) Set temperature displaying mode.
When Show ° F (Fahrenheit Degree) is selected, the temperature will be displayed by
Fahrenheit degree in Realtime Display tab.
5.12.2.2 Viewing Temperature and Humidity Data
You can view the temperature and humidity data on the Realtime Display interface after the
IoT function is enabled.
In the Refresh Interval box, select data refresh interval. For example, you can select 5 Sec.
Figure 5-240
Figure 5-241
Local Configurations 237